Corrugated colour boxes, export master cartons and printed manuals — designed, printed and finished on one 22,500 m² floor in Zhejiang.
Eight colours in a single pass, 0.02 mm registration, FSC paper
Request a QuotationOperated by an ALWID audited manufacturing partner — Zhejiang, China
Corrugated colour boxes and export master cartons are tested for burst, edge crush and compression before they are filled — the three failures that ruin a container.
A KBA eight-colour press lays down four process colours plus spot, ground and inline varnish in one run, so a six-colour brand box is a single pass, not three.
Kodak CTP and X-Rite measurement settle the colour at proof stage. The press is then held to that proof, not the other way round.
FSC-certified base paper, RoHS reports, ink MSDS and adhesive SDS are kept as documents — the file you can hand to your own compliance team.
The floor that runs this programme — printing, die-cutting, stripping, and the stock that feeds it.
Die-cutting — a flatbed platen cuts and creases in one pass
Stripping — waste cleared automatically before folding
Digital inkjet — inner boxes and sheets printed without plates
Digital inkjet — master cartons printed on demand
Paper stock — imported reels held on site before printing
Finished-goods warehouse — 7,000 m² of packed stock on racking
Retail boxes for aftermarket parts
Single unit, kit or multipack
Three- and five-layer board
Matt or gloss varnish
Colour boxes
Five-layer corrugated board
Printed with your shipping marks
Compression-tested to the stack load
Barcode and label panel as specified
Master cartons
Installation sheets
Multilingual manuals
One-colour or four-colour
Folded, flat or poly-bagged
Print & manuals
Board and cartons are measured against the approved specification, not against the last run.
Certificates on file: FSC · ISO 9001:2015 · Export licence · RoHS report · Ink MSDS · Adhesive SDS
Your artwork, or ours built onto a dieline — structure settled before plates.
Kodak CTP imaging and a digital proof signed off in colour.
Eight-colour run, sheets pulled and measured through the run.
Cut, creased, stripped and glued on the same floor.
Bundled, palletised and documented for export.
Brands on the works’ own client list — AISIN · MAGNETI MARELLI · TRW · PHC Valeo · NAPA · MEYLE · MONROE · DAYCO · Unicorn · SRR · TBTS · OSSA · FREY · GEARRA
Names are quoted as a reference to the works’ client record. ALWID is not affiliated with these marques.
A die line, a sketch, or the box you want to replace
Annual quantity, colours, board grade and finish
Destination, shipping marks, barcodes and any FSC statement
Feasibility answer within 5 working days · NDA available before you share artwork
Stamped, spun and machined clutch release forks, levers and tensioner hardware — 221 references mapped to the vehicles they fit.
Next ›Cooling & Water Pumps · Shanghai · Pinghu · Dong Nai (Vietnam)Mechanical and electric water pumps, thermal modules and oil coolers — cast, machined and assembled in-house.
Send the dieline or the box you want to replace — our programme manager handles proofing, tooling and delivery.
English project management · Print-ready proofs · Export packing included